• Barksdale's Bourdon Tube Pressure Switches offer instrument class accuracy, making them an ideal solution to your pressure control needs when accuracy is critical. Built-in over-travel stops allow for higher proof pressures than most other pressure switch technologies. Setpoints are easily adjusted via an internal adjustment screw. Available in single and dual configurations, Bourdon Tube Pressure Switches are adaptable for use in a wide range of industrial applications. A variety of limit switches is available to allow for a multitude of electrical switching conditions. For applications requiring a highly accurate switch in a highly durable package, Bourdon Tube Pressure Switches are the ideal solution PART NUMBER: 
    • B1T-S32SS
  • Barksdale's D1T Terminal Block Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure control needs. These switches are ideal for applications requiring water-tight, NEMA 4 housings a covered terminal strip and tamper-proof external adjustment. (Factory set models are also available.) With pressure ranges up to 150 psi, these housed diaphragm pressure switches are suitable for use in either positive pressure or vacuum applications. Single- and dual-circuit models are available. Housed models feature a durable, anodized aluminum enclosure. For applications requiring a highly accurate switch in a durable package, Barksdale's D1T Terminal Block Diaphragm Pressure Switches are the ideal choice.

    PART NUMBER

    • D1T-A80SS
  • Barksdale's Diaphragm Pressure Switches offer superior accuracy in a robust package, making them the ideal solution to your industrial pressure control needs. Diaphragm switches are ideal for applications demanding instrument class accuracy and where pressure pulsations are less than 25 cycles per minute. Available in various pressure ranges up to 150 psi, diaphragm switches are suitable for use in either positive pressure or vacuum applications. Single, and dual, and triple circuit models are available. Housed model (D2H) feature a durable, anodized aluminum enclosure with an integrated 1/2" NPT conduit connector, a tamper-resistant cover for the setpoint adjustment screws, and are rated to NEMA 4 as a standard. For applications requiring a highly accurate switch in a durable package, Barksdale's Diaphragm Pressure Switches are the ideal choice.
  • Barksdale's EPD1S Single Setting Pressure Differential Pressure Switches provide an ideal solution when you need a high quality, differential pressure switch with high reliability and accuracy to meet your application requirements. These snap-action switches are available in stripped or housed versions and are easily adjustable via a set-point screw. Factory set models are also available. The housed version enclosure features a 3-contact terminal strip for easy electrical connection.

    PART NUMBER: 

    • EPD1S-AA40
  • The MSPS Series Pressure Switches offer reliable, trouble-free performance in a compact, economical package. Available in both stripped and housed models, this switch can reliably measure and control pressures up to 100 psi. A variety of limit switches are available to accommodate up to 20 Amps of switching current at 125 VAC. With its UL and CSA listings, this switch is an ideal choice for use in pool & spa heaters. A wide range of available options allow the MSPS Series Pressure Switches to be easily adapted for general industrial use. For low-pressure applications requiring a highly economical solution, use Barksdale MSPS Series Pressure Switches.
  • Barksdale's ML1H Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat. The single set point ML1H, can switch, measure & control temperatures from -50° to 450°F (-45° to 232°C), while the optional adjustable differential provides precise control. These locally mounted switches provide fast response and accurate measurements at the temperature source. ML1H Series are electrically rated for 10 amps @ 125/250 VAC & 3 amps @ 480 VAC. Standard 3- & 6-pin terminal strips simplify installation. The ML1H Series is rated NEMA 4 & 13; the optional NEMA 4X construction protects the rugged die-cast aluminum enclosure from corrosive environments. Copper or stainless steel temperature sensors are available to handle a wide range of media. Optional thermowells allow the sensor to work in pressurized vessels to 5000 psi. UL listed & CSA approved, ML1H Series Temperature Switches are perfect for your temperature sensing needs.

    PART NUMBER:

    • ML1H-H204S
  • Barksdale's B2X Explosion Proof Bourdon Tube Pressure Switches offer instrument class accuracy, making them an ideal solution to your hazardous location pressure control needs when accuracy is critical. Built-in over-travel stops allow for higher proof pressures than most other pressure switch technologies. Setpoints are easily adjusted via an internal adjustment screw. Available in single and dual circuit configurations, Bourdon Tube Pressure Switches are adaptable for use in a wide range of industrial applications. A variety of limit switches is available to allow for a multitude of electrical switching conditions. For applications requiring a highly accurate switch in a highly durable package, Barksdale Bourdon Tube Pressure Switches are the ideal solution.

    PART NUMBER:

    • B2X-S48SS-UL
  • Barksdale's ML1H Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat. The single set point ML1H can switch, measure & control temperatures from -50° to 450°F (-45° to 232°C), while the optional adjustable differential provides precise control. These locally mounted switches provide fast response and accurate measurements at the temperature source. ML1H Series are electrically rated for 10 amps @ 125/250 VAC & 3 amps @ 480 VAC. Standard 3- & 6-pin terminal strips simplify installation. The ML1H Series is rated NEMA 4 & 13; the optional NEMA 4X construction protects the rugged die-cast aluminum enclosure from corrosive environments. Copper or stainless steel temperature sensors are available to handle a wide range of media. Optional thermowells allow the sensor to work in pressurized vessels to 5000 psi. UL listed & CSA approved, ML1H Series Temperature Switches are perfect for your temperature sensing needs.

    PART NUMBER:

    • HL2H-HH202S
  • Barksdale's Series 425 Transmitters are general-purpose, industrial-grade transducers, ideal for use in general industrial applications when a robust transducer is required. Wetted parts are constructed of 17-4PH and 300 Series Stainless Steel, with NEMA 4 enclosures constructed of 304 Stainless Steel. These units feature a stable, diffused silicon sensor that achieves .25% accuracy, have pressure ranges from 0-10,000 psi, and are available in 5V, 10V or 4-20 mA outputs. High-pressure snubbers are standard on units at 2,000 psi and above. Optional surge voltage protection to 6kV is available. A variety of process fittings and electrical connections are available to meet your needs.

    PART NUMBER:

    • 425X-13
  • SHEAR-SEAL® MANUAL DIRECTIONAL CONTROL VALVE Series 9020

    Barksdale's Series 9000 Valves control hydraulic fluids and gasses up to 350 psi. Featuring Barksdale's famous Shear-Seal® technology, the Series 9000 Valves offer dependable performance and long life for manual control of commercial and industrial process applications. The versatile design of this valve offers the ability to tailor the perfect configuration to meet your installation requirements.

    PART NUMBER: 

    • 9021-MC-A
  • The 52321 Air Suspension Valve utilizes Barksdale's patented Shear-Seal® technology to accurately control suspension height in commercial and recreational vehicle applications. Shear-Seal® has become the industry leader through superior performance and long life, even under the most demanding conditions. Barksdale height control valves feature proportional response and are available in both low flow and high flow configurations. These features combine to minimize air consumption without the use of inaccurate and failure prone time delay elements found in competing products. Available push-to-connect fittings and single or dual bag ports allow for easy and fast installation. The Barksdale valve's compact design and Barksdale's ability to customize the product make it a perfect fit on any suspension. PART NUMBER:
    • 52321-Q136
  • The 41⁄2˝ and 6˝ Ashcroft ® Type 1009 gauges are suitable where ambient corrosion is a major concern. Its attractive stainless steel case and ring provides excellent resistance to chemical, weather and corrosion attack.This 1009 has many optional features that allow a user to develop a basic or special product specification.The 1009 is part of the extensive line of Ashcroft stainless steel pressure gauges.
  • WORKING LIMITATIONS:

    Dynamic Pressure The working pressure should be limited to 60% of the dial range. Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range   PART NUMBER: 40-911-300SSFF
  • REOTEMP’s Bimetal Thermometers are reliable and accurate temperature sensors requiring no electricity or wiring. Back Connect Thermometers are ideal for local, eye-level temperature readings in most process applications. They can be recalibrated with a turn of the calibration screw on the back of the dial. A variety of options are available for your specific process needs. PART NUMBER: AA0254F47
  • GO Switch provides reliable, durable proximity sensing in the most demanding conditions. Using unique technology, GO Switch outperforms all other types of sensors in applications that require high reliability and durability. PART NUMBER: 73-13522-F2
  • DUST EXCLUDER

    $8.16$25.00
    The function of the Versa Dust Excluder is based on a flexible seal resting on a large diameter seat.  
  • This Parker PS506P automatic float drain kit is a replacement drain and accessories for 06 and 07 Series filters. It is made of plastic for strength and durability, with a nitrile O-ring for resistance to oil. It has a maximum pressure rating of 250 pounds per square inch gauge (psig) and an operating temperature range of 32 to 175 degree F. The kit includes automatic drain, O-ring, and mounting nut and fits the 06F, 07F, 06E, 07E, 06A, 07A, 06G, and 07G Series of particulate filters. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others. PART NUMBER: PS506P
  • FEATURES:

    • Excellent water removal efficiency.
    • Unique deflector plate and shroud creates a swirling of the air stream ensuring maximum water and dirt separation.
    • Large filter element surface guarantees low pressure drop and increased element life.
    • Optional Push ‘N’ Drain requires only fingertip touch to drain. Optional automatic float drain available.
    PART NUMBER: 06F13AC
  • 67C Series direct-operated regulators and filter regulators are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. These are suitable for most air or gas applications. Other applications include providing reduced pressures to air chucks, air jets, and spray guns.   PART NUMBER: 67CFR226
  • Cam shaft kit for 270 degree operation Part Description: Wrench 1/16” Wrench 0.035” Gear, Camshaft, 40 tooth, (270 degree rotation) Gear, Pot, 40 tooth, (270 degree rotation) Spacer; Pot Gear Instruction Manual for Pot/Camshaft Gear Kit
  • FEATURES: 

    Featuring a zero-bleed pneumatic relay, the PMV D3 positioner is suitable for linear or rotary valves, single- or double-acting actuators, and special applications. Available with general purpose, intrinsically safe or explosion-proof housings, and with plug-in modules for limit switches and feedback. PART NUMBER: D3INU-D23PVA-Z4SX
  • 2” thru body w/ 600# RF End connections 1/4” TC stub ACME trim Max opening: 16/64” CV: 1.38 Body/flange material: ASTM 216WCB Stem material: 410SS/TC Seat material: 316SS/TC Seal material: Teflon/Viton Temperature class: U (0F to 250F) WP: 1,480# PSI according to flange end connections
  • They are engineered for high temperature, steam injection or other high temperature gas or liquid service. They are designed to operate in any installation position and resist the effects of vibration on the selected setting. Their construction allows easy inspection and individual piece replacement without needing to remove the valve body from the line. They are manually adjusted valves designed to provide excellent repeatability. They are available in 1 in. and 3 in. [25.4 mm and 50.8 mm] body sizes and a wide range of body configurations and trim packages. Type 316 and 410SS components are offered for corrosive services. Threaded and butt-weld connections are rated up to 5000# PSI working pressure. Valve Trims are available in Stainless Steel and Tungsten Carbide materials. Other coatings are also available.