-
The 41⁄2˝ and 6˝ Ashcroft ® Type 1009 gauges are suitable where ambient corrosion is a major concern. Its attractive stainless steel case and ring provides excellent resistance to chemical, weather and corrosion attack.This 1009 has many optional features that allow a user to develop a basic or special product specification.The 1009 is part of the extensive line of Ashcroft stainless steel pressure gauges. -
WORKING LIMITATIONS:
Dynamic Pressure The working pressure should be limited to 60% of the dial range. Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range PART NUMBER: 40-911-300SSFF -
REOTEMP’s Bimetal Thermometers are reliable and accurate temperature sensors requiring no electricity or wiring. Back Connect Thermometers are ideal for local, eye-level temperature readings in most process applications. They can be recalibrated with a turn of the calibration screw on the back of the dial. A variety of options are available for your specific process needs. PART NUMBER: AA0254F47 -
GO Switch provides reliable, durable proximity sensing in the most demanding conditions. Using unique technology, GO Switch outperforms all other types of sensors in applications that require high reliability and durability. PART NUMBER: 73-13522-F2 -
Out of stock
The function of the Versa Dust Excluder is based on a flexible seal resting on a large diameter seat. -
This Parker PS506P automatic float drain kit is a replacement drain and accessories for 06 and 07 Series filters. It is made of plastic for strength and durability, with a nitrile O-ring for resistance to oil. It has a maximum pressure rating of 250 pounds per square inch gauge (psig) and an operating temperature range of 32 to 175 degree F. The kit includes automatic drain, O-ring, and mounting nut and fits the 06F, 07F, 06E, 07E, 06A, 07A, 06G, and 07G Series of particulate filters. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others. PART NUMBER: PS506P -
FEATURES:
- Excellent water removal efficiency.
- Unique deflector plate and shroud creates a swirling of the air stream ensuring maximum water and dirt separation.
- Large filter element surface guarantees low pressure drop and increased element life.
- Optional Push ‘N’ Drain requires only fingertip touch to drain. Optional automatic float drain available.
-
67C Series direct-operated regulators and filter regulators are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. These are suitable for most air or gas applications. Other applications include providing reduced pressures to air chucks, air jets, and spray guns. PART NUMBER: 67CFR226 -
Cam shaft kit for 270 degree operation Part Description: Wrench 1/16” Wrench 0.035” Gear, Camshaft, 40 tooth, (270 degree rotation) Gear, Pot, 40 tooth, (270 degree rotation) Spacer; Pot Gear Instruction Manual for Pot/Camshaft Gear Kit -
FEATURES:
Featuring a zero-bleed pneumatic relay, the PMV D3 positioner is suitable for linear or rotary valves, single- or double-acting actuators, and special applications. Available with general purpose, intrinsically safe or explosion-proof housings, and with plug-in modules for limit switches and feedback. PART NUMBER: D3INU-D23PVA-Z4SX -
2” thru body w/ 600# RF End connections 1/4” TC stub ACME trim Max opening: 16/64” CV: 1.38 Body/flange material: ASTM 216WCB Stem material: 410SS/TC Seat material: 316SS/TC Seal material: Teflon/Viton Temperature class: U (0F to 250F) WP: 1,480# PSI according to flange end connections -
They are engineered for high temperature, steam injection or other high temperature gas or liquid service. They are designed to operate in any installation position and resist the effects of vibration on the selected setting. Their construction allows easy inspection and individual piece replacement without needing to remove the valve body from the line. They are manually adjusted valves designed to provide excellent repeatability. They are available in 1 in. and 3 in. [25.4 mm and 50.8 mm] body sizes and a wide range of body configurations and trim packages. Type 316 and 410SS components are offered for corrosive services. Threaded and butt-weld connections are rated up to 5000# PSI working pressure. Valve Trims are available in Stainless Steel and Tungsten Carbide materials. Other coatings are also available.
